Currier Tech Ezip, Owner'S Manual, Page: 82 / 123

82
Final check
• After all adjustments have been made, shift through
every gear several times at varying speeds. This will
ensure all your adjustments are correct and will allow
you to pinpoint any trouble areas. If you encounter any
problems, refer to the appropriate section and make any
necessary adjustments.
• Check the tire pressure and inflate each tube to the
recommended psi as stated on the sidewall of the tire.
• Check that the kickstand operates smoothly and the
kickstand bolt is secured tightly.
• Finally, examine the bicycle. Make sure all accessories
are attached and all quick releases, nuts and bolts have
been tightened securely.
• Correct maintenance of your bicycle will ensure many
years of happy riding. Service your bicycle regularly by
referring to the relevant sections of this manual, OR
take it to a professional bicycle shop.
• Remember: Always wear a helmet and obey all traffic
laws.
never inflate a tire beyond the maximum pres-
sure marked on the tire’s sidewall. exceeding
the recommended pressure may blow the tire
off the rim, which could cause damage to the
bicycle and injury to the rider and bystanders.
tighten both rear wheel axle nuts or the quick
release mechanism securely. Failure to do this
may cause the rear wheel to dislodge from the
frame dropouts resulting in serious damage
or injury.
!
!