manualshive.com logo in svg

Currier Tech Ezip, Owner'S Manual, Page: 44 / 123

Share
Download
Currier Tech Ezip Owner'S Manual Download Page 44

44

Enlightened TMM 

Bike

RTMB Bike

Power Switch - turn 

to “ON” position

Red light should 

turn “ON” first

Orange light 

should turn 

“ON” while 

charging

Plug charger into 24V battery charger port

3. 

Turn the charger’s power switch “ON”

4. 

The red light should come on indicating the charger has 

5. 

power. The orange light should then come on indicating 

that the charger is charging the battery. When the light 

changes from orange to green the battery is full and the 

charger has completed charging the battery.

use only currie authorized li-ion chargers with bicycles equipped with li-ion batteries. 

using any other charger will damage the batteries and void your warranty.

!

* If the orange light flashes when the charger is plugged 

into the battery, the charger does not recognise your 

battery. Please contact Customer Service for help 

resolving this issue.

Summary of Contents for Ezip




























































































































Reviews:

No comments