Currier Tech Ezip, Owner'S Manual, Page: 61 / 123

61
attachment of an incorrect pedal into a crank arm can
strip pedal threads and cause irreparable damage. Before
your first ride, please check to insure your pedals are
attached correctly.
pedals & crank set
Look for the letters “R” for right, and “L” for left, stamped on each pedal
spindle. Start threading each pedal by hand to avoid stripping the threads.
Tighten with a 15mm narrow open ended wrench. Note that the right
hand pedal attaches to the chainwheel side crank arm with a right-hand
(clockwise) thread. The left pedal attaches to the other crank arm and has
a left-hand (counter-clockwise) thread. It is very important that you check
the crank set for correct adjustment and tightness before riding your
bicycle. New cranks may become loose with initial use, refer to pages
99-101 for proper crank set adjustment and maintenance. Once the pedals
have been installed, remove the dust caps from the center of each crank
arm. Tighten the spindle nuts securely (approx. 350 in. lbs.) with a 14mm
socket wrench or an 8mm Allen wrench, depending on style, then replace
the dust caps.
Dust
Cap
!
Attach
Seat Here
Boot Minimum
Insertion
Mark
Preload adjusting
screw on underside
suspension seatpost proper seat position
Seat is level with ground
and centered in clamp