Currier Tech Ezip, Owner'S Manual, Page: 58 / 123

58
shifters
Tighten the bolts that clamp the shifters and brake
levers to the handlebar using a 5mm Allen key or
Phillips head screwdriver. This step is completed at the
factory, but it should be checked before operating your
bicycle.
(Figure 1) Handlebar with Grip Shifter.
(Figure 2) Top mounted thumb shifter.
Failure to properly tighten clamping bolts may cause sudden
movement of the component resulting in loss of steering control.
!
1.
Shifter binder bolt
(2.5mm Allen key)
Brake lever binder bolt (tighten from top side)
(5mm Allen key)
2.
Shifter binder bolt
(4mm Allen key)