Currier Tech Ezip, Owner'S Manual, Page: 15 / 123

15
Your new bicycle was partially assembled in the factory and then partially disassembled for shipping. You
may have purchased the bicycle already fully assembled and ready to ride OR in the shipping carton in the
partially disassembled form. The following instructions will enable you to prepare your bicycle for years of
enjoyable cycling. For more details on inspection, lubrication, maintenance and adjustment of any area please
refer to the relevant sections in this manual. If you have questions about your ability to properly assemble this
unit, please consult a qualified bicycle service specialist before riding. If you need replacement parts or have
questions pertaining to assembly of your bicycle, call the service line direct at:
seRvice and technical suppoRt:
1 800 377 4532
Monday - Friday 8:00 a.m. - 4:00 p.m. (pst)
typical tools Required:
•
Phillips head screw driver
•
2.5mm, 3mm, 4mm, 5mm 6mm & 8mm Allen keys
•
Adjustable wrench or a 8mm, 9mm, 10mm, 13mm, 14mm,
15mm & 17mm open/box end wrenches
•
A pair of pliers with cable cutting ability
When working on your bicycle as instructed by this
manual, please refer to the torque values chart on page
x for detailed torque requirements. under- or over-
tightened components may loosen or break, causing a
fall.
to avoid injury, this product must be properly assembled before use. if your bicycle was
obtained assembled, we strongly recommend that you review the complete assembly
instructions and perform checks specified in this manual before riding.
!