Currier Tech eZip Skyline Owner'S Manual Download Page 62

Page: 62 / 64

122

123

CAUTION:

Not all bicycles can be safely retrofitted with some types of suspension systems. Before retrofitting a bicycle

with any suspension, check with the bicycle’s manufacturer to make sure that what you want to do is compatible with the

bicycle’s design.

WaRninG:

If your bike has suspension, the increased speed you may develop also increases your risk. When braking,

the front of a suspended bike dips. You could lose control and fall if your skill is not up to handling this system. Get to

know how to handle your suspension system safely before trying any downhill or very fast mountain biking.

Suspension can increase the handling capabilities and comfort of your bicycle. This enhanced capability may allow you

to ride faster; but you must not confuse the enhanced capabilities of the bicycle with your own capabilities as a rider.

Increasing your skill will take time and practice. Proceed carefully until you are sure you are competent to handle the full

capabilities of your bike. Never ride at a speed or on terrain which is not suitable for your personal riding skill and experience.

Always proceed cautiously in areas where you are not familiar with the terrain. If you exceed your limitations, serious injury or

death could occur.

ADDT'L SAFETY INSTRUCTIONS

Do not allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with moving parts, wheels or

drivetrain, while the motor is running.

Make sure that the areas that the bicycle is to be used in are safe and suitable for safe operation.

Make sure that all safety labels are in place and understood by the rider. No passengers are allowed on the bicycle

Make sure that any and all axle guards, chain guards, or other covers or guards supplied with the bicycle are in place

and in good working condition.

Make sure that tires are in good condition, inflated properly, and have sufﬁcient tread remaining.

Persons with following conditions are cautioned not to operate the bicycle:

Those with heart conditions

Pregnant women

Those with head, back, or neck ailments, or prior surgeries to those areas of the body

Those with any mental or physical conditions that may make them susceptible to injury or impair their physical

dexterity or mental capacities to recognize, understand and perform all of the safety instructions and to be able to

assume the hazards inherent in operating the bicycle.

SAFETY INSTRUCTIONS (INSERT)

Summary of Contents for eZip Skyline

































































Search results

Summary of Contents for eZip Skyline

Reviews:

Currier Tech eZip Skyline, Owner'S Manual, Page: 62 / 64

Search results

Summary of Contents for eZip Skyline

Reviews: