manualshive.com logo in svg

Currier Tech eZip Skyline, Owner'S Manual, Page: 2 / 64

Share
Download
Currier Tech eZip Skyline Owner'S Manual Download Page 2

2

3

OM 2012

Last modified May 25, 2012 2:29 PM

CORRECT

 FITTING - MAKE 

SURE YOUR HELMET COVERS 

YOUR FOREHEAD.

INCORRECT

 FITTING. FOREHEAD 

IS EXPOSED AND VULNERABLE 

TO SERIOUS INJURY.

•  ALWAYS WEAR A PROPERLY FITTED HELMET WHEN YOU RIDE 

  YOUR BICYCLE. 

•  DO NOT RIDE AT NIGHT.

•  CPSC RECORDS SHOW THAT ABOUT 35% OF BICYCLE 

  RELATED DEATHS OCCUR AFTER DARK.

•  AVOID RIDING IN WET CONDITIONS.

•  CPSC RECORDS SHOW THAT ABOUT 65% OF INJURIES

  HAPPEN TO CHILDREN UNDER 15 YEARS OF AGE.

•  RIDE ONLY WITH ADULT SUPERVISION

HELMETS

SAVE

LIVES!!!

FULLY CHARGE BATTERIES BEFORE FIRST USE

 - Batteries should be fully charged immediately when 

they are received and immediately after each use for the recommended charge times (see below). 

•  Li-Ion (Lithium Ion) batteries 4-6 hours (2-3 hours for Via Urbano)
•  SLA (Sealed Lead Acid) batteries 6-10 hours

 

 

 

With proper care and maintenance your Currie Technologies® Hybrid Electric Bicycle will provide ease of use and be fun to ride. 
Below are points that will help you to maximize the enjoyment you get from your new hybrid electric bicycle.

FACTORS TO MAxIMIZE THE RANgE OF YOUR HYBRID ELECTRIC BICYCLE

•  RideR input

 - the more the rider pedals the further the distance traveled. Continuous riding, as opposed to 

frequent stopping and starting, will yield the greatest range possible

•  elevation Gain

 - the flatter the road the further the distance traveled

•  WeatheR

 - cold weather can adversely affect the battery capacity

•  Wind

 - traveling with a tailwind will increase distance traveled, traveling into a headwind will decrease distance 

traveled

•  teRRain

 - the smoother the terrain (roadways vs. fireroads, etc.) the further the distance traveled

•  RideR WeiGht

 - the lighter the rider, resulting in less drain on the batteries, the further distance traveled

•  Bicycle Maintenance

 - a properly maintained bicycle will yield the greatest range possible

•  tiRe pRessuRe

 - properly inflated tires have less rolling resistance and will be easier to pedal

•  BatteRies

 - properly charged and maintained batteries will yield the greatest range possible. Batteries stored in 

cold areas (below 50 degrees Fahrenheit / 10 degrees Celsius) will show reduced range. Batteries that have not 
been kept in optimum condition will show reduced range and run time.

!

We recommend that you consult a bicycle specialist if you have doubts or concerns as to your experience or ability to 

properly assembly, repair, or maintain your bicycle.

Additional warning/cautions are in the assembly section of this manual

Summary of Contents for eZip Skyline

































































Reviews:

No comments