manualshive.com logo in svg

Currier Tech eZip Skyline, Owner'S Manual, Page: 26 / 64

Share
Download
Currier Tech eZip Skyline Owner'S Manual Download Page 26

50

51

Handlebar Power Buttons

Some 2010 RMB and TMM models feature a handlebar-mounted 

power button, either on the control box or as a separate two-

button control next to the throttle.

 

On TMM bicycles this handlebar button is the sole means of 

turning the electrical system on and off; there is no other power 

switch. 

 

RMB bicycles with handlebar-mounted power buttons use a 

two-position battery selector switch as described in the following 

section, in addition to the handlebar-mounted controls.

Key Lock Power Switch

Handlebar Power Button 

(RMB & RTMB 2010)

Two Position Power Switch

Control Box Power Button 

(TMM)

Key Lock Power Switches

Certain models (ex. HG1000, Tricruiser) are equipped with a key 

lock power switch. This feature provides added security allowing 

only the person with the key to turn the power on or off. This key 

lock switch has the same function as a standard power switch.

Control Box Power Button 

(RMB)

Two-Position Power Switches

RMB bicycles with handlebar mounted power buttons use a 

two-position ON/ON switch, located behind the rear reflector on 

the backside of the rack. The left or right switch position selects 

a corresponding battery, and does not need to be changed again 

unless a different battery source is desired.

Fuses

All Currie Technologies® Hybrid Electric Bicycles are equipped 

with fuses. The fuse may be located, depending on the model of 

bike, in the following locations

•  CX Series (40A glass type fuse) - On the battery pack, 

externally accessible

•  RMB Series (40A glass type fuse) - On the backside of the 

battery pack, externally accessible

•  STB Series (24V, 40A glass type fuse) - Inside the battery, 

must open the battery pack to access

•  STB Series 2011+ (24V, 40A glass type fuse) - On the 

battery pack, externally accessible

•  STB Series (36V, 40A glass type fuse) - On the battery 

pack, externally accessible

•  Enlightened Series (Li-Ion, 30A blade type fuse & 5A blade 

type fuse) - inside the bottom end of the downtube, remove 

downtube cap to access

In the event of an overload the fuse will pop and need to be 

replaced. In this instance replace only with an approved part from 

Currie Technologies®

Risk of fire. do not bypass fuse.

!

RMB Bicycles (2007, 2008)

CX Bicycles

STB Bicycles (24V)

STB Bicycles (24V) 2011

STB Bicycles (36V)

Enlightened Series (Li-Ion)

Summary of Contents for eZip Skyline

































































Reviews:

No comments