manualshive.com logo in svg

Currier Tech eZip Skyline, Owner'S Manual, Page: 11 / 64

Share
Download
Currier Tech eZip Skyline Owner'S Manual Download Page 11

20

21

USINg THE BICYCLE RACK 
Safety

Please consider the following instructions before using any luggage carrier (front or rear rack) attached to your bicycle:

• 

The maximum capacity of rear carrying racks on Currie products is 25kg (including any attached battery).

• 

The maximum capacity of front racks or baskets on Currie products is 10kg.

• 

Do not use any bicycle luggage carrier as a child seat.

• 

Be sure the combined rider and luggage weight of your bicycle does not exceed the bicycle's weight limit.

• 

Frequently check that all fasteners related to luggage carriers are fastened securly.

• 

Do not modify your luggage carrier.

• Currie bicycle racks are not designed to pull a trailer; do not attach a trailer to any luggage carrier.

• 

Note that bicycle handling (steering and stopping distance) may be different when the racks are carying weight.

• 

Ensure that any luggage is securely fitted to the bicycle rack per the manufacturer's instructions, and that no 

hanging straps can get caught in the wheels.

• 

Be sure reflectors or lights attached to your bicycle are not obscured by your rack or attachments.

• 

Distribute luggage evenly on either side of the rack for even weight balance.

ATTACHMENT

The following hardware should be used to attach a rack to its respective bicycle

• 

RMB & RTMB bicycle racks - 4x M6 x 14mm bolts, with lock washer, stainless steel. Torque to 10Nm.

• 

Via Urbano rack - 4x M6  x 14mm bolts, with lock washer, stainless steel. Torque to 10Nm.

• 

Skyline (optional rack) - 4x M6,14mm bolts, 2x m6 lock nuts. Stainless steel. Torque to 10Nm.

• 

Other racks - Use included hardware, tightening attachment bolts to 10Nm.

!

This page intentionally left blank

Summary of Contents for eZip Skyline

































































Reviews:

No comments