35
2
3
1
Giovedì
07.07.2022
20.14
Giovedì 07.07.2022 - 20.14
Giovedì 07.07.2022 - 20.14
Giovedì 07.07.2022 - 20.14
Fig.42
Fig.41
Ed. 0722 - 70702552 REV05 Leonardo - Use and maintenance
CLEANING THE CHAMBER WITH THE PYROLY-
SIS FUNCTION
Pyrolysis is a thermochemical crystallization process of food
residues that have deposited in the cooking chamber, which
takes place by bringing the oven up to 400 °C - 725 °F.
Before starting the pyrolysis, remove the coarser
food residues with a natural fibre brush.
Fig.41
CLEANING THE CHAMBER WITH PYROLYSIS | MANUAL
1
Touch the
ON/OFF
key (if the oven is off );
2
touch the
PYROLYSIS
key;
3
confirm pressing
OK
: the heating of the cooking chamber
starts until the temperature of 400 °C - 752 °F is reached,
when the function stops and the oven switches off auto-
matically without you needing to do anything. To block
the function early, press the pyrolysis key again or turn the
oven off with the
ON/OFF
key
;
4
in a cold oven, clean the chamber from the crystallized
food residues using a natural fibre brush and then vacuum
with an ash extraction bin
Fig.42
When the pyrolysis function starts, the room
lights are turned off to preserve them.
CHAMBER CLEANING WITH PYROLYSIS IN “WEEKLY
PROGRAMMING” MODE
It is possible to clean the chamber with pyrolysis as a pro-
grammed event accessing the
Programmed switch-on
menu
(see page
24
) and indicating the time when you want pyrol-
ysis to be performed.
Maintenance and cleaning |
CLEANING
Attention, if you program the start of the function:
- at 11:59 pm on Monday, the function will start that day
and at that time;
- at 00:00 the function will always start on Monday, at
midnight.
Therefore, if you want to start it at midnight on Tuesday, you must
select the key relating to that day.
CUPPONE