Cuppone Leonardo Use And Maintenance Manual Download Page 24

Page: 24 / 42

Giovedì

07.07.2022

20.14

Giovedì

07.07.2022

20.14

Giovedì

07.07.2022

20.14

Giovedì

07.07.2022

20.14

Giovedì

07.07.2022

20.14

Giovedì

07.07.2022

20.14

Giovedì

07.07.2022

20.14

Fig.25

Programmed switch-on

The programmed switch-on function is very useful be-
cause the oven can be already hot, and therefore ready to
bake, when the restaurant is opened.

With this function, you can program

the oven switching on

and off automatically

for the whole week.

It is possible to program up to a maximum of

4 events

a day

(that is 4 daily switch-ons and switch-offs).

SETTING A PROGRAM

Fig.25

Touch the

PROGRAMMED SWITCH-ON

icon.

Touch a white rectangle.

Set the details, choosing:

the oven

switch-on

time

the oven

switch-off

time

the

recipe

or the

function

(e.g. pyrol-

ysis) with which the
oven must start

the

days

the pro-

grammed event must

take place

orange day

event is planned (pro-

grammed switch-on

or switch-off )

grey day

no event

is programmed

Confirm the entered details with

.....

If necessary, program other events repeating the

same procedure.

Event 1

: on Mondays, Tuesday and Fridays, the oven will

switch on at 11:00 in the morning and switch off at 14:00 with
the “NEAPOLITAN” recipe

Event 1

: on Saturdays and Sundays the oven will switch on at 11:00

in the morning and switch off at 15:00 with the “CLASSIC” recipe

Event 2

: the oven will switch on every evening at 18:00 in and

switch off at 23:30 with the “NEAPOLITAN” recipe.

Use |

PROGRAMMED SWITCH-ON

Summary of Contents for Leonardo











































Search results

Summary of Contents for Leonardo

Reviews:

Related manuals for Leonardo

Brands by name

Popular brands

Cuppone Leonardo, Use And Maintenance Manual

Search results

Summary of Contents for Leonardo

Reviews:

Related manuals for Leonardo

Brands by name

Popular brands