Cuppone Leonardo Use And Maintenance Manual Download Page 25

Page: 25 / 42

Napoletana

Giovedì

07.07.2022

20.14

Giovedì

07.07.2022

20.14

Giovedì

07.07.2022

20.14

Fig.26

Napoletana

Giovedì

07.07.2022

20.14

Giovedì

07.07.2022

20.14

Giovedì

07.07.2022

20.14

Fig.27

Programmed switch-on

ACTIVE

programmed switch-on

INACTIVE

Ed. 0722 - 70702552 REV05 Leonardo - Use and maintenance

Use |

PROGRAMMED SWITCH-ON

Fig.26

At the end of the settings it is necessary to make the week-

ly function operational by moving the cursor to the right so
that it turns green and the number

is displayed.

grey icon

the weekly programmed switch-on mode

is inactive (which remains set anyway);

the user’s manual (non-automated) switch-

on mode is active;

green icon

the weekly programmed switch-on mode

(based on the details set) is active

Confirm the entered details with

CANCELLING A WEEKLY PROGRAM

Touch the

PROGRAMMED SWITCH-ON

icon.

Disable the programming by moving the slider to the left

so that it turns grey and

is displayed.

Confirm your selection with

From now on, the oven must be switched on/off manually by
the user.

The previous programming however remains in the memory;
to reactivate it, simply move the cursor back to the right so that
it turns green and

is displayed.

When a weekly pro-
grammed switch-on is
active, the STAND-BY
page shows the time and
the recipe of the next au-
tomatic switch-on and
the icon turns orange.

CUPPONE

Summary of Contents for Leonardo











































Search results

Summary of Contents for Leonardo

Reviews:

Related manuals for Leonardo

Brands by name

Popular brands

Cuppone Leonardo, Use And Maintenance Manual

Search results

Summary of Contents for Leonardo

Reviews:

Related manuals for Leonardo

Brands by name

Popular brands