31
Fig.39.
ED. 0919 - 70702552 REV00 Leonardo - Use and maintenance
Disposal at end of life
To avoid any unauthorised use and associated risks, be-
fore discarding the machine make sure it cannot be
used; for this purpose, cut and remove the power cord
(once the equipment is unplugged).
Make sure no child can accidentally remain trapped inside the
cooking chamber, locking the door (for example, with adhesive
tape or locks).
Equipment disposal
Pursuant to art. 13 of Legislative Decree No. 49 of 2014
“Implementation of WEEE Directive 2012/19/EU on
electrical and electronic waste”, the crossed-out
wheelie bin specifies that the product entered the
market after 13 August 2005 and that at the end of its useful life
it must not be assimilated to other waste but must be disposed
of separately. All the equipment is made of recyclable metal
materials (stainless steel, iron, aluminium, galvanized sheet,
copper, etc.) in a percentage higher than 90% by weight. It is
necessary to pay attention to the management of this product
in its end of life reducing the negative impacts on the
environment and improving the effectiveness of the use of
resources, applying the "polluter-pays”, prevention, preparation
for re-use, recycling and recovery principles. Please note that
unauthorized or incorrect disposal of the product leads to the
application of the penalties provided for by the current
legislation.
Information on disposal in Italy
WEEE equipment in Italy must be delivered to:
• to Collection Centres (also named eco-islands or eco-plat-
forms)
• the dealer where new equipment is purchased who must
withdraw it free of charge ("one to one" withdrawal).
Information on disposal in European Union countries
The EU Directives on WEEE equipment has been adopted
in different ways by different countries, therefore in order to
dispose of this equipment correctly we suggest that you
contact your local authority or your dealer in order to ask the
correct method of disposal.
Oven downtime for prolonged
periods
When the product is not in operation, disconnect it from the
mains. Protect the steel outside surfaces passing over them
with a soft cloth slightly damp with Vaseline oil.
Leave the door ajar to guarantee correct ventilation.
Before resuming operations:
• accurately clean the equipment and accessories;
• reconnect the equipment to the power;
• inspect the equipment before using it.
Maintenance and cleaning
