26
ECO
1:00
100 %
100 %
DOOR
SET
150°C
0%
MAN
MANUAL
TUESDAY 03.12.2019 - 16:44
025
°C
A
B
Working hours since last cleaning: 2 h
TUESDAY 03.12.2019 - 16:44
Chamber probe failure
Resolve the fault and
restart the system
Notification message
Chamber probe failure
Resolve the fault and
restart the system
Notification message
ECO
1:00
100 %
100 %
DOOR
SET
150°C
0%
MAN
MANUAL
TUESDAY 03.12.2019 - 16:44
025
°C
A
B
C1
C2
Fig.30.
Fig.31.
Service
Messages and warnings
Fig.30.
If the system detects a problem, an alarm pop-up message appears.
Alarms
block the oven operation to prevent more serious damage; in this case, in order to be
able to use the appliance again, you must contact your Dealer for the repair.
As well as in the pop-up message, the detected problems are displayed also in the “Alarm Log”
screen; in this page, in addition to the alarms,
an indication of the time that can pass before ask-
ing your Dealer for maintenance is given.
Control/Parameters
These menus are for specialized personnel.
To prevent unauthorized people from accessing the programming of the parameters that, if
incorrectly set, may affect the use of the oven, they are protected with a password supplied
specially by the Manufacturer.
Multimedia
Fig.31.
From this page it is possible to import/export files from/to a USB stick connected to the special
USB connector.
This operation is reserved only to qualified personnel because the connector is
located in an area subject to voltage and therefore potentially dangerous.
A message is displayed that warns
that a problem has blocked the
oven operation.
Contact your Dealer for repair
without attempting to repair the
appliance yourself; this could
cause personal injury and will
void the Manufacturer’s warranty.
An indication warns
about when it is nec-
essary to contact your
Dealer for mainte-
nance.