Cumberland INT-4807, Installation And Operation Manual

Page: 42 / 54

42 PNEG-1323 Integra Feed-Link
11. Feed-Link Software
Feed-Link Setup Installation Instructions (Continued)
B. Modem
1. A modem connection is when the PC calls
via its modem to a network collector.
2. The network collector is shipped to default to
a 19200 baud rate. A modem connection will
automatically sync up at the correct
baud rate.
3. Make sure dipswitch #4 is set to the “ON”
position. The dipswitch (SW2) is located in
the upper left corner of the network
controller.
(See Figure 11D on Page 41.)
4. Set the dipswitch on the modem board in the
“UP” position. (See Figure 11E on Page 41.)
5. The last item to enter on the connection
folder is the phone number of the
network collector.
6. In some applications the network collector
may not have the internal modem on the
stack connection, and can only be
connected to via a direct connection as
outlined above. If an internal modem is
present, which is the standard case, then the
dipswitch on the modem board must also be
the up position for a modem connection and
the down position for a direct connect.
7. Auto download will let you schedule when
you want information sent to you
automatically.
(See Figure 11G.)
Figure 11F
Connection Settings Tab
Figure 11G
Auto Download Settings Tab
Figure 11H
Edit Global Settings