48
Expert-50 rev.10
Expert-50
Use the up-arrow and down-arrow keys to select the clock cycle to
adjust. The clock cycle number appears on the top left hand side of
the display.
Press Edit key. The hours value of the start time flashes. Use the
arrow keys to adjust the hours value to the desired value. Press the
Edit key. The minutes value of the start time flashes. Use the arrow
keys to adjust the minutes value to the desired value.
If the timer is configured for start/stop times, press the Edit key. The
hours value of the stop time flashes. Use the arrow keys to adjust the
hours value to the desired value. Press the Edit key. The minutes
value of the stop time flashes. Use the arrow keys to adjust the min-
utes value to the desired value.
If the timer is configured for start/
running times, press the Edit key.
The hours value of the running time
flashes. Use the arrow keys to ad-
just the hours value to the desired value. Press the Edit key. The
minutes value of the running time flashes. Use the arrow keys to
adjust the minutes value to the desired value. Press the Edit key. The
seconds value of the running time flashes. Use the arrow keys to
adjust the seconds value to the desired value. Note that if a power
failure interrupts this output, it is reactivated for the remainder of the
running time when power is restored.
1.Start:00:00A
Run: 00h 00m00s
Summary of Contents for EXPERT-50
Page 1: ...Expert 50 Temperature Controller USER S MANUAL M 890 00075 rev 10 REV 01...
Page 2: ......
Page 57: ...NOTES NOTES...
