26
Expert-50 rev.10
Expert-50
If the curve is OFF
, Press the Edit key. The minimum speed for
variable output 1 flashes. Use the arrow keys to adjust the minimum
speed to the desired value.
Press the Edit key to adjust the minimum speed for variable output 2
as above.
Adjusting Timer Settings
The on time ranges from 0 to 99 minutes, 59 seconds and cannot be greater
than the cycle time. The cycle time ranges from 1 minute, 30 seconds to
99 minutes, 59 seconds.
Set the function to
MINIMUM VENTILATION / CURVE
using the menu
select buttons. The current on time, cycle time, curve on/off state and
fan selection are displayed.
If the curve is ON, press the Edit key. The on/off state of the curve
flashes on the display. Use the arrow keys to turn the curve off. Press
the Edit key once again and follow the instructions below.
If the curve is OFF, press the Edit key. The on time minutes value
flashes on the display. Use the arrow keys to adjust the on time
minutes to the desired value.
Press the Edit key. The on time seconds value flashes on the display.
Use the arrow keys to adjust the on time seconds to the desired value.
Press the Edit key. The cycle time minutes value flashes on the dis-
play. Use the arrow keys to adjust the cycle time minutes to the
desired value.
Press the Edit key. The cycle time seconds value flashes on the dis-
play. Use the arrow keys to adjust the cycle time seconds to the
desired value.
Summary of Contents for EXPERT-50
Page 1: ...Expert 50 Temperature Controller USER S MANUAL M 890 00075 rev 10 REV 01...
Page 2: ......
Page 57: ...NOTES NOTES...
