4
SYSTEM SET-UP & INSTALLATION
14
CUES Inc.
,
WTR III User Manual | TX920
CUES Inc.
,
WTR III User Manual | TX920
15
www.cuesinc.com
,
www.cuesinc.com
,
CONVERTING THE WTR III FROM WHEELS TO TRACKS
ON THE RIGHT SIDE OF THE TRANSPORTER...
3. Using a 3/16” hex bit wrench, remove the bolt that secures the left side wheel module to the brass
body.
4. Using a 9/64” hex bit wrench, remove the three screws that attach the right wheel module to the
motor assembly.
5. Slide the wheel module off of the shaft.
3
4
5
CONVERTING THE WTR III FROM TRACKS TO WHEELS
NOTE: Wheel module Installation is achieved by performing the opposite steps of this removal procedure.
