4
SYSTEM SET-UP & INSTALLATION
20
CUES Inc.
,
WTR III User Manual | TX920
CUES Inc.
,
WTR III User Manual | TX920
21
www.cuesinc.com
,
www.cuesinc.com
,
9
8
7
HOW TO INSTALL THE ADAPTERS
6.
Install the appropriate shaft extender to the shaft
on the motor module (refer to the
Configuration
Matrix
in this manual).
7.
Align the slot on the wheel module to the shaft
extender pin.
8.
Install and tighten the screw on the left side track
module.
9.
Provide proper strain relief, install the cable tie,
and cut off any excess.
NOTE: Do not use tape or cable ties to secure the tow
cables to the motor transmission module. Verify that
there is proper strain relief between the main cable to
the transporter cable. Adjust as necessary. Verify that
the chain tension is correct. Refer to P/N’s TX324 and
TX325 in the BOM section of this manual for more
information.
6
Cable Tie
ADAPTING THE WTR III TO DIFFERENT PIPE CONFIGURATIONS
-TRACKS
