4
14
CUES Inc.
,
WTR III User Manual | TX920
CUES Inc.
,
WTR III User Manual | TX920
15
www.cuesinc.com
,
www.cuesinc.com
,
SYSTEM SET-UP & INSTALLATION
TO INSTALL THE RIGHT TRACK MODULE
1. Verify that the key is still in place on the shaft.
Place the track against the motor transmission
module. Obtain the right track module. Turn the
track until the keyway is aligned with the key on
the shaft and slide it in. Apply a small amount
of blue thread-locker on the three captive
mounting screw threads.
2. Install the right-side track module onto the motor
module. IMPORTANT! Ensure that all 3 screws
are pulled down evenly while tightening.
3. Once bottomed-out, back-off (1) turn to
prevent the track module from binding on the
motor transmission module. Do not fully tighten
the screws yet.
1
2
3
CONVERTING THE WTR III FROM
WHEELS TO TRACKS
