Cuckoo AC-12ZH10F, Operating Instructions Manual

Page: 28 / 84

Other Setting Methods
28
This is how to set the initialize the time for filter change alarm after the filter is replaced. When the
"Change Filter" light is turned ON, replace the filters, and initialize the time for filter
change alarm.
How To Initialize time for filter change alarm
After putting the Power Plug in, press the Mode button for three seconds or longer
in the waiting mode (when all the lights of the Display Panel are turned OFF).
(While the product is working, stop it by pressing the "ON/OFF" button.)
1
You can set your preferred voice among English, Chinese and Korean voices.
The default voice setting is English.
The Display Panel will display "En" as in the picture.
2
Please select the language(English, Chinese, Korean)by pressing "Fan Speed" button.
3
Save the function setting by pressing the "ON/OFF" button.
※
When you press the TIME button or remove the Power Plug, the function setting will be canceled.
※
When no button is pressed for seven seconds or longer, the function setting will be canceled.
4
How to Set Language
<In case of setting English voice> <In case of setting Korean voice>
<In case of setting chinese voice>
After putting the Power Plug in, press the Mode button for three seconds or
longer in the waiting mode (when all the lights of the Display Panel are turned
OFF), enter the Language Setting, and press the Mode button again.
After putting the Power Plug in, press the STERILIZATION button for three seconds in the waiting
mode (when all the lights of the Display Panel areturned OFF) and the alarm will be initialized.
(While the product is working, stop it by pressing the "ON/OFF" button.)
1
This is how to cancel the Voice function or control the voice volume.
The Display Panel will display "3" and "Voice" as in the picture.
2
Set the volume as you want by pressing the "Fan Speed" button.
※
If you set the volume to be "0F," the Voice function will be canceled.
3
Save the function setting by pressing the "ON/OFF" button.
※
When you press the TIME button or remove the Power Plug, the function setting will be canceled.
※
When no button is pressed for seven seconds or longer, the function setting will be canceled.
4
How to Set Voice Volume
<In case Voice function is canceled>
Press the STERILIZATION button for three seconds.
➡
➡
<Maximum Voice Volume> <Default Voice Volume>