Cuckoo AC-12ZH10F, Operating Instructions Manual

Page: 25 / 84

Operation Mode Information
25
w
w
w
.c
u
ck
o
o
w
o
rld
.c
o
m
E
N
G
L
IS
H
※
When there is no water in the Water Tank, the "Add Water" display will be turned ON.
※
The pollution degree is displayed from "Clean (blue)", "Average (violet)", and to "Polluted (red)".
※
The above figures show the screens of the Display Panel for each operation mode,
and may differ from the actual appearances shown when the product is working.
BABY
•
The product enters this mode when you press the MODE button four times in the AUTO mode.
•
The product minimizes the air volume, and operates the STERILIZATION function to help babies sleep well.
•
When the product enters this mode initially, the current humidity will be displayed for seven seconds.
After that, only the "Baby" display will turned ON, and all the rest will be turned OFF.
REPEAT
•
The product enters this mode when you press the MODE button five times in the AUTO mode.
•
Press the TIME button to set the Repeated Operation time.
(You can set the time into one to 12 hours with one hour as the unit.)
•
When the TIME button is not pressed, the product will repeat operation andstop with one hour as the unit.
•
When there is a previous operation history, the product will work for the previously set time.
•
The product repeats operation and stop according to the set time.
•
The operation is the same as in the AUTO mode.
➡
Current humidity displayed (50%) All but the BABY display are turned OFF
Display
[ON]
Fan speed displayed (light)
[OFF
(in case it's turned
ON within one hour)
]
TURBO
•
You can enter this mode if you press the Turbo button once.
•
The product rapidly performs air purification by setting the maximum fan speed.
•
The current humidity and the fan speed are displayed in turn with the interval of five seconds.
•
When the product enters this mode initially, the Turbo Operation time is 30 minutes, and when
the operation time has passed, the product returns to the previous operation mode.
•
You can change the operation time through function setting.
▶
Refer to How To Set Functions in page 30.
Current humidity displayed (50%) Fan speed displayed (Turbo)