Cuckoo AC-12ZH10F, Operating Instructions Manual

Page: 30 / 84

Other Setting Methods
30
After putting the Power Plug in, press the Mode button for three seconds or longer in
the waiting mode (when all the lights of the Display Panel are turned OFF), enter the
Language Setting, and press the Mode button six times.
(While the product is working, stop it by pressing the "ON/OFF" button.)
1
This is a function to minimize energy consumption by recognizing the brightness of the surroundings
automatically while the product is operating air purification. It minimizes the functions of the Display
Panel when it senses darkness. It is a method to set the darkness sensing range of the Night Sensor
used for power-saving function.
The Display Panel will display "2" as in the picture.
2
Set the level from among OFF through level 3 by pressing the
"Fan Speed"button.
※
OFF: Set OFF when you do not use the darkness sensing function.
※
Level 1: The product operates the darkness sensing function in surroundings
darker than the reference value (Level 2).
※
Level 2: Reference value for darkness sensing mode
※
Level 3: The product operates the darkness sensing function in surroundings
brighter than the reference value.
3
Press the "ON/OFF" button to save the setting.
※
When you press the TIME button or remove the Power Plug, the function setting will be canceled.
※
When no button is pressed for seven seconds or longer, the function setting will be canceled.
※
When you press the TIME button or remove the Power Plug, the function setting will
be canceled.
※
When no button is pressed for seven seconds or longer, the function setting will be
canceled.
4
How To Set Energy Eye Function
After putting the Power Plug in, press the Mode button for three seconds or longer in
the waiting mode (when all the lights of the Display Panel are turned OFF), enter the
Language Setting, and press the Mode button five times.
(While the product is working, stop it by pressing the "ON/OFF" button.)
1
When no button is pressed during operation, this function properly controls the brightness of the
screen to save the energy.
The Display Panel will display "On" as in the picture.
2
Press the "Fan Speed" button to set or cancel the mode.
※
When canceled, the screen lighting will be maintained to be bright.
3
Press the "ON/OFF" button to save the setting.
※
When you press the TIME button or remove the Power Plug,
the function setting will be canceled.
※
When no button is pressed for seven seconds or longer,
the function setting will be canceled.
4
How To Set Screen Power Save
<Screen Power Save ON>
<Screen Power Save OFF>
<Level 2>
<Energy Eye OFF>
<In case of selecting
30 minutes>
<In case of selecting
Non-Stop Operation>
After putting the Power Plug in, press the Mode button for three seconds or longer in
the waiting mode (when all the lights of the Display Panel are turned OFF), enter the
Language Setting, and press the Mode button seven times.
(While the product is working, stop it by pressing the "ON/OFF" button.)
1
This is a function to set the operation time of the Turbo operation. The default Turbo operation time is 30 minutes.
The Display Panel will display "30" as in the picture. 2
Press the Fan Speed button to set one from among 10 minutes, 20 minutes,
30 minutes, 40 minutes, 50 minutes, and Non-Stop operation.
3
Press the "ON/OFF" button to save the function setting.
4
How to Set the Time for Turbo mode