Cuckoo AC-12ZH10F, Operating Instructions Manual

Page: 23 / 84

Basic Operation
23
w
w
w
.c
u
ck
o
o
w
o
rld
.c
o
m
E
N
G
L
IS
H
Put in the Power Plug.
▶
The product will enter the waiting mode with a buzzer
sounding.
1
Press the ON/OFF button.
▶
The ON/OFF button icon and AUTO will be turned ON on the Display Panel, and the Fan
starts working.
The current humidity and the fan speed is displayed in turn with the interval of five
seconds on the 4-Digit 7-Segment Display.
※
When there is no water in the Water Tank, Add Water will be turned ON. When the Water
tank is not mounted, the Water Tank Not Mounted error will be displayed on the 4-Digit 7-
Segment Display.
※
When the Filter Cover is not mounted, the Filter Cover Not Mounted error will be
displayed on the 4-Digit 7-Segment Display.
※
The product remembers the mode operated last and starts working.
(Turbo operation is an exception.)
2
Press the MODE button to set the mode as you want.
▶
Each time your press the button, the mode will change from "AUTO" to "MANUAL",
"SLEEP", "FINE DUST", "BABY", and "REPEAT" in order.
3-1
Press the FAN SPEED to control the strength of wind as you want.
▶
When you press the button for the first time, the product will enter the Manual Air
Purification mode. Each time you press the button, the fan speed will repeat changing
from "gentle" to "light" and "strong" in order.
3-2
Press the TIME button to set the AUTO OFF time.
▶
You can set the AUTO OFF time by pressing the TIME button during operation.
※
If the AUTO OFF is set, the TIME button icon will flicker for three seconds and the light
will be turned ON.
※
You can set the AUTO OFF Time into one to 12 hours with one hour as the unit.
※
Preset the time to be “- -”, and the AUTO OFF mode will be canceled.
3-3
Press the STERILIZATION button to activate the Plasma Ionizer.
▶
If you press the button, the ion generation operation of the Plasma Ionizer will start
and the icon will be turned ON. If you press the button again while the Plasma
Ionizer is working, the operation of the Plasma Ionizer will be ended.
3-4
Basic Operation
Press the TURBO button to change the operation mode.
▶
It is a mode to be selected when operating air purification at a high speed with the
maximum air volume.
※
When the Turbo operation works, the Turbo icon will be turned ON.
※
Press the button again during the Turbo operation, and the product will enter the
previous operation mode.
3-5
When you want to stop the product, press the ON/OFF button again.
▶
All the lights of the Display Panel and the Front Display Panel will be turned OFF,
and the product will enter the waiting mode.
4