25
Duplicator 2.20
1. Copy (SM)
Duplicator 2.20
10. Hard Drive Setup
Hard Drive Setup
1. Select Partition
Counter Specified
No Counter Specified
PASS 25 FAIL 0
Job Completed! Press OK to Finish
or:
Input Bin Empty
Reset Hoppers?
¾
“PASS 25” indicates 25 discs have
been erased successfully.
¾
“FAIL 0” indicates no discs have
failed the erase process.
Press the
ENT/Enter
button to finish
¾
“Input Bin Empty” indicates that the
system has run out of discs to erase.
If you have more discs to erase, you
can empty the Output Spindle; place
the discs to be erased in the Input
Spindle and Press the
ENT/Enter
button to continue.
If you have no more discs to erase,
press the
ESC/Escape
button to
terminate the operation.
10. Hard Drive Setup
The Hard Drive Setup menu consists of following sub-menus:
1
Select Partition
2
Load Partition
3 Rename
Partition
4
Delete Partition
5
Partition Info
6
Select Loading Drive
7
Format Hard Drive
Each of these menus is discussed in its own subsection.
If you are at the
1. Copy
Menu, do the following:
Use the
Up or
Down
button to find
10. Hard Drive Setup
.
Press the
ENT/Enter
button on
10. Hard Drive Setup
to enter the
menu. Use the
Up or
Down
button to select between the
options.
10.1 Select Partition
The
Select Partition
submenu is used to select the partition on the Hard Drive that will be used as
the default partition choice for various Hard Drive related tasks.
Press the
ENT/Enter
button to enter the
Select Partition
menu.
