12
Counter:
Specify Counter
Specify Counter:
[0 ] OK?
Counter:
No Counter
6. Setting Counters and Assigning Names
Two frequently used tasks are setting counters and assigning names to partitions. Directions for
these tasks are given here.
6.1 Setting Counters
The autoloader frequently gives you the option to set a counter so that the machine can keep
track of the number of copies made. Follow these steps when you see the Counter Selection
Menu:
The Counter Selection Menu lets you set how many copies you
want to make for your project. The Counter Selection feature tells
the autoloader to count the number of successful copies you have
made and stop the job when the desired number of successfully
copied discs has been reached.
You can select “No Counter” if you prefer to copy continuously with no interruption. (It will still
count the number of copies, but it will not notify you when to stop.) To select “No Counter”, simply
press the
ENT/Enter
button when you see the screen above.
Or, you can select “Specify Counter” between 1 to 9999 by pressing the
Up or
Down button
to go to the Specify Counter menu:
Press the
ENT/Enter
button to select this option. You will see the
next
Specify Counter
menu.
To specify the number of copies for your project, you need to
enter/input a four-digit number.
If you need to specify a number that is less than four digits, fill the leading spaces with zeros (any
leading zeros will be skipped). Examples of four-digit numbers are “0234” (two hundred and thirty
four), or “0010” (ten).
To enter the number, you need to use the
Up or
Down button
to select the number for each
digit and use the
ENT/Enter
button or the
ESC/Escape
button to move the cursor position right or
left. Once you've finished, move the cursor to “OK” and press the
ENT/Enter
button. For example,
if you want to specify a counter value of 21 (twenty one). The 4-digit value would be “0021.” To
input the desired quantity, do the following:
Make sure the cursor is located at the first position (First blinking position):
¾
Press
the
Down
button repeatedly until “0” is displayed.
¾
Press
ENT/Enter
button once to move the cursor to the next position.
¾
Press
the
Down
button repeatedly until “0” is displayed.
¾
Press
ENT/Enter
button once to move the cursor to the next position.
¾
Press
the
Down
button repeatedly until “2” is displayed.
¾
Press
ENT/Enter
button once to move the cursor to the next position.
¾
Press
the
Down
button repeatedly until “1” is displayed.
¾
Now, “0021” is displayed, press
ENT/Enter
button once and the cursor moves to “OK”.
Specify Counter:
[0 ] OK?
