29
down-Tube option
Removing the Rechargeable Battery
Before removing the rechargeable battery, make sure the magnet-
ic connector is no longer connected to the charging socket of the
rechargeable battery. You can disconnect the magnetic connector
that leads from the motor to the battery simply with a slight jolt
(e)
.
Release the lock
(f)
, disconnect the magnetic connector from the
charging socket and slide the rechargeable battery in tilted position
upwards by applying a little pressure. Subsequently, the recharge-
able battery disengages automatically from its holder and can be
removed easily.
Fastening the Rechargeable Battery
When the rechargeable battery is fully charged and you want to re-
fasten it to the bicycle, make sure the lock in the battery housing is
open. Position the rechargeable battery on the fastening rail that is
firmly screwed to the CUBE EPO pedelec. This is done with the con-
nector socket on the left side in direction of motion and with the lock
on the right side of the battery housing. Make sure when placing the
battery on the fastening rail that the toothing engages with the fas-
tening rail. The rechargeable battery should be slightly offset to the
front of the fastening rail.
Press the rechargeable battery with a slight jolt in tilted position
downwards
(g)
so that it engages with the fastening rail. Check the
correct seat of the rechargeable battery on the fastening rail by clos-
ing the lock. The key is not necessary to close the lock. Apply a little
pressure to press the projecting locking cyclinder into the lock un-
til it engages, the battery being thus locked. If the lock closes easily,
the rechargeable battery is correctly fitted to the fastening rail
(h)
and you can connect the magnetic socket that comes from the mo-
tor into the connector plug in the battery housing. Your CUBE EPO
pedelec is now ready for use.
f
h
e
g
Cube_EPO_Gesamt_EN_2011-05.indd 29
11.05.2011 10:11:30
