15
7. Check whether the values shown on the display are correct and
complete
(f)
. Do not use your CUBE EPO pedelec, if the display
shows an error message or a warning.
Do not set off on your CUBE EPO pedelec when the display shows
a warning. In such a case, contact your CUBE dealer immediately.
For more information see chapter
“display operation and Con-
trol”
.
8. Finally, take a good look at the whole CUBE EPO pedelec
(g)
to
detect any deformations, colour changes or cracks.
Ride back very carefully by taking the shortest route possible,
even if your CUBE EPO pedelec went through this check without
any problems. Do not accelerate or brake hard and do not ride
your bicycle out of the saddle. If you are in doubt about the per-
formance of your CUBE EPO pedelec, have yourself picked up by
car, instead of taking any risk.
Back home you need to check your CUBE EPO pedelec thorough-
ly. The damaged parts must be repaired. Ask your CUBE dealer for
help.
g
Deformed components, especially components made of
aluminium, can break without previous warning. They
must not be repaired, i.e. straightened, as the imminent
risk of breakage will remain. This applies in particular to
the fork
(h)
, the handlebars, the stem, the cranks, the seat
post and the pedals. When in doubt, it it always recom-
mendable to have these components replaced, as your
safety comes first. Ask your CUBE dealer for help.
f
h
e
g
Cube_EPO_Gesamt_EN_2011-05.indd 15
11.05.2011 10:11:26
