CU-ER1 Operator’s Manual _ver 3.00
11.2 DATA REVIEW USING THE PARAMEDIC CU-ER1
11.2.1 Internal Flash Memory
Data from the latest rescue operation is stored in the internal flash memory of the
Paramedic CU-ER1
if the SmartMedia Card is not present in its port. The data stored in
the internal flash memory may be displayed and reviewed on the LCD screen of the device.
To review the stored data, perform the following steps:
a.
Turn the Paramedic CU-ER1 ON without inserting the SmartMedia Card and without
connecting any ECG Monitoring/Defibrillator Electrode pads connector assembly to the
ECG-DEFIB port.
b.
Activate the menu by turning the Paramedic CU-ER1 and pressing the MENU button.
Go to REVIEW INCIDENT – USAGE REVIEW or REVIEW INCIDENT – ECG REVIEW.
11.2.2 SmartMedia Card (Optional Accessory)
Data from the latest rescue operation is stored in the SmartMedia flash memory card if it
is installed in its port before the Paramedic CU-ER1 is turned ON.
Installation of a SmartMedia Card
a)
Ensure that the SmartMedia Card is clean and dry.
b)
Turn the
Paramedic CU-ER1
OFF.
c)
Load the SmartMedia Card with the metallic strip facing down and the notched end
going in first. Push the card all the way in until the card hits a stop. The SmartMedia
Card is ready to record data when the
Paramedic CU-ER1
is turned ON for use.
d)
When the device is turned ON with the SmartMedia Card inserted, the SmartMedia
card data recording symbol is displayed on the right bottom side of the LCD display.
is displayed when the Voice Recording option is ON.
is displayed when the Voice Recording option is OFF
d.
Only SmartMedia Cards supplied by CU Medical Systems, Inc. are compatible with the
Paramedic CU-ER1. Do not use any other kind of flash memory card.
80