CTM HS-268, Service Manual

Page: 20 / 68

Service manual
18
Folding / Unfolding Errors :
Code
Power On Turn off the main power switch
Battery Low Charge the battery immediately
Seat springs fall off
Refer to SERVICE-7-1 Seat Spring
Repair
Seatback is not flipped down
Flip down the seatback and restart the
folding / unfolding procedure.
Scooter is not on flat ground
Scooter cannot be folding / unfolding if
it’s not placed (lay down) on a flat ground.
Please place the scooter on a flat ground
and restart the folding / unfolding
procedure.
Foreign Object on footplate.
Check and remove the object on the
footplate and restart the folding /
unfolding procedure.
Optional accessories
interference Remove obstructions such as :
handrails or baggage etc.
Folding / unfolding light indicator
on scooter is not in orange
(enter into sleep mode)
Acton :
1.Please wake up the
folding / unfolding function
(see figure on the right)
2. SERVICE-11-5 Folding / Unfolding
Board Repair.
Tapping error on the folding /
unfolding buttons
If the “Folding button” is pressed when
the scooter has already been folded
it will fold further. Press “Unfolding
button” again and do this until the
scooter has been fully expanded.
Scooter anti-tipping angle is too
great
Scooter has anti-tipping protection,
please place it on flat ground and to
correct the problem.
Remote control inactive
Solution :
1.Battery needs to be replaced.
2.Refer to
SERVICE-12-2 Remote
Board.
Folding / unfolding button inactive.
Refer to SERVICE-11-5 Folding /
Unfolding Board.
Scooter folds incorrectly
Possible Solution :
1. SERVICE-13-1 Solenoid Valve Repair
SERVICE-13-2 Folding Unit Repair
(manual version only)
2. SERVICE-13-3 Sliding Track Repair
3. SERVICE-13-7 Linear Actuator Repair
4. SERVICE-13-8 gas spring Repair
5. SERVICE-13 Frame Repair
6. SERVICE-13-6 Sliding Base Repair
Description What to do
1
2
3
4
5
6
7
8
9
10
11
12
13