CTC Union EOe-1, User Manual

Page: 9 / 44

Chapter 1. Introduction
3
Ethernet Bridge
Features
„
10BASE-T/100BASE-TX, Full Duplex or Half Duplex
„
HP Auto-MDI/MDIX detects and corrects crossed cable
„
IEEE 802.3x flow control
„
Real-time filtering with 256 address tables
„
Automatic address learning, aging and deletion after 5 minutes
„
Up to 340 packet-buffering capacity
„
Forwarding and filtering rate at WAN speed with throughput latency of
1 frame.
„
Auto padding of undersized packets to meet the minimum Ethernet
packet size requirement
„
Buffering modes can be selected according to the setting of WAN and
LAN line speeds
„
Ethernet interface has automatic Twisted Pair polarity correction
Specifications
„
LAN
Standard Fully compliant with IEEE 802.3/802.3u
Connector Shielded RJ-45
Speeds 10BASE-T/100BASE-TX, Full or Half Duplex
Frames Supports 64 to 1522 byte packet lengths, standard
and extended length frames for VLAN tagging, etc.
„
WAN
Protocol Synchronous HDLC
Data Rates 16K, 32K, 64K, 128K, 256K, 512K,1024K or
2048Kbps (DIP Switch selected)