CSR Bradford Maestro BAL, Product Manual

Page: 16 / 27

16
Installation - Metal Roof
STEP 14
Secure the flashing
to the metal sheeting
with Tek screws or
sealed rivets along the
3 exposed edges of the
flashing.
Approximately 10
required (not supplied)
PROCEED TO ELECTRICAL CONNECTION
*Important Note* If using the Maestro BAL t o comply with NCC2019
Performance Solution a dditional Maestro BAL's and eave vents may be required
depending on the ceiling area of the home. For more information on the number
of Maestro BAL and eave vents required see Page 7 of this manual or visit
bradfordventilation .com.au
Installing an eave vent
Mark a 185mm x 385mm rectangle on
the eave lining
Drill holes to mark out the rectangle
Use a hacksaw to cut out the rectangle
Attach the vent using the screw
provided
Eave vents should be evenly distributed
around the perimeter of the home