CSR Bradford Maestro BAL, Product Manual

Page: 4 / 27

4
Warnings and Important Notices
WARNING: Do not proceed with the installation until you have read
the entire instructions, including these warnings.
INSTALL AT YOUR OWN RISK
The installation of this product may be dangerous and includes the potential
of death, personal injury or property damage. Please be aware of the
following before installing this product.
• Follow any state or territory regulator OH&S guidelines for working
at height (e.g. Roof work), electrical, working in elevated temperatures
(e.g. roof space in summer).
• Installation requires climbing and working at heights.
Use caution to minimise risks by:
• Clearing the area below the workspace
• Not walking on surfaces that are slippery, wet or dusty
• Using appropriate equipment (tie off ladders etc.)
• DO NOT attempt to install if you are uncomfortable with working at
heights or on sloping roof surfaces
• There are sharp edges on the flashing, cut tiles, roof sheeting etc.
Take care and wear personal protective equipment when handling
and installing products
• Be aware that the Maestro BAL once connected to mains power will
start. Do not connect the unit to mains power until the installation is
complete.
• DO NOT attempt to put anything into the running fan blades as
this many cause personal injury and/or damage to the unit.
• Be aware of electrical cabling in the roof. If there is any sign of risk,
isolate the power before entering the roof space. Be aware that there can
be non-isolated electrical cables such as mains supply and solar
supply. Note if these are in the roof space and avoid these items.