6
The contents of this install guide are copyright protected and may not be reproduced in any form without prior written consent of CSR. Recommendations and
advice regarding the use of the products described in this guide are to be taken as a guide only, and are given without liability on the part of the company or
its employees. We reserve the right to change product specifications without prior notification, please refer to the CSR website for the latest version of this
document. The purchaser should independently determine the suitability of the product for the intended use and application.
3.
INSTALLATION UNDER THE RIDGE
Note: See Section 4 for installation away from the ridge.
a.
Set Position
: Place the base flashing under the ridge cap at the required position and adjust the
position to avoid structural roof members below the roof sheet. Ensure the flashing covers the
corrugation or ribs equally on each side of the flashing, then mark a circle on the roof using the hole in
the flashing as a template.
