13
The contents of this install guide are copyright protected and may not be reproduced in any form without prior written consent of CSR. Recommendations and
advice regarding the use of the products described in this guide are to be taken as a guide only, and are given without liability on the part of the company or
its employees. We reserve the right to change product specifications without prior notification, please refer to the CSR website for the latest version of this
document. The purchaser should independently determine the suitability of the product for the intended use and application.
4.
INSTALLATION AWAY FROM RIDGE
a.
Set Position
: Place the base flashing at the required position and adjust the position to avoid structural
roof members below the roof sheet. Ensure the flashing covers the corrugation or ribs equally on each
side of the flashing, then mark a circle on the roof using the hole in the flashing as a template.
