18
The contents of this install guide are copyright protected and may not be reproduced in any form without prior written consent of CSR. Recommendations and
advice regarding the use of the products described in this guide are to be taken as a guide only, and are given without liability on the part of the company or
its employees. We reserve the right to change product specifications without prior notification, please refer to the CSR website for the latest version of this
document. The purchaser should independently determine the suitability of the product for the intended use and application.
f.
Weather Sealing
: Seal the Varipitch seam on the inside with a bead of weather-resistant
suitable sealant.
NOTE
:
DO NOT
apply sealant to the joint between the flashing and Varipitch. This is a natural
gutter to release any trapped condensation. See details in section (i) below.
g.
Secure Varipitch to Flashing:
Reposition the Varipitch on the Flashing and check it is
horizontal - secure the Varipitch to the flashing using the recommended number of screws
shown in the table below –
DO NOT SEAL
this connection.
Do Not Seal
