2
The contents of this install guide are copyright protected and may not be reproduced in any form without prior written consent of CSR. Recommendations and
advice regarding the use of the products described in this guide are to be taken as a guide only, and are given without liability on the part of the company or
its employees. We reserve the right to change product specifications without prior notification, please refer to the CSR website for the latest version of this
document. The purchaser should independently determine the suitability of the product for the intended use and application.
SYSTEM PRE-REQUISITES – Check Before Commencing
Before attempting to start the installation, please ensure that the following allowable roof pitch and
make-up air requirements can be met.
Product
Make-up air* per ventilator - 100%
open, evenly distributed open area
Allowable Roof Pitch
EcoPower 400
Hurricane 100 - 400
≥
0.3m²
up to 45°
EcoPower 600
Hurricane 450 - 600
≥
0.5m²
up to 45°
EcoPower 900
Hurricane 700 - 900
≥
0.9m²
up to 22.5°
* Performance values are based on a 5Pa pressure loss across the make-up air opening.
Additional make-up air can be provided as per the recommendations in AS1668.2.
DO NOT PROCEED TO INSTALL THIS PRODUCT IF THE ABOVE REQUIREMENTS ARE NOT
MET
1.
PACKING LIST
(for a standard complete product)
– Check Before Commencing
Included Parts
Additional Materials Required - Not Supplied
a.
FASTENERS
(Quantity and Type)
Product
Head to Varipitch
Varipitch to Flashing
Flashing to Roof
EcoPower 400
Hurricane 100 - 400
6
6
12
EcoPower 600
Hurricane 450 - 600
9
9
16
EcoPower 900
Hurricane 700 - 900
12
12
26
Fasteners
Use 10G X 16MM Galvanised Self Drilling TEK Screws with Neoprene
Washer or 5/32" (4.0mm) Rivets Aluminium/Steel Sealed
Ventilator Head
Varipitch
Flashing
