CryptoTelecom S-160, User Manual, Page: 58 / 86

58
whether it is duplicated or not.
③
is to check whether the Camera is to be open or not.
④
is for the function to connect to S-160 easily by
User’s ID and Password registered in S-160, to monitor or control Video of S-160 on Mobile Phone. (Mobile
Phone Users should tick “Enable” and input connection ID and Password.)
‘EMAIL SERVICE’ is the function to send the set message to E-mail address set by user upon alarm on S-160 in
case user set the use of alarm server as Enable. (refer to ‘ Alarm Setting ’ in ‘ 4. Expert Setting ’). It is available to
input up to 5 Mail address and input up to 5 messages upon checking on ‘ENABLE’.
Pic. 5 ― 13 Camera Registration
‘SMS SERVICE’ is the function to send the set message (SMS) from PIMA Server to Mobile Phone number set
by user upon alarm on S-160, in case setting to use Alarm Server as ‘ENABLE’. (refer to ‘ Alarm Setting ’ of ‘ 4.
Expert Setting ’). It’s available to input up to 5 Mobile Phone to get SMA Message and input up to 5 messages
upon checking on ‘ENABLE’.
Cautions
: Input Mobile Phone Number without ‘-‘ or any space
Click ‘Camera Registration’ to save the registered information after input of all information.
5.3.3 List of Camera
Input the registered User ID and Password to connect to PIMA Server on [Pic.5-7].