CryptoTelecom S-160, User Manual, Page: 20 / 86

20
Pic 3 ― 5 IP Change
Pic. 3 ― 6 IP Change loading Page
15) Remove LAN Cable (Cross Cable) connected between S-160 and PC.
16) Connect S-160 to Network with LAN Cable (Straight Cable).
17) Connect PC to Network with LAN Cable (Straight Cable)..
18) Set up IP Address, Subnet Mask and Gate way of PC according to Network environment.
19) Check
9
Run Web Browser on PC, input IP address set in S-160 onto URL and click ‘Enter’,
9
Check if IP Setting is correct or not, referring to ‘ Video Check ’
9
In case Video is seen, S-160 has been correctly set up.
9
In case Video is not seen, check whether there may be confliction of IP in Network, and re-
check the set value of Network environment of S-160, and Network environment of User’s PC.
3.2.2 Dynamic IP Setup
9
Do not set up Dynamic IP in S-160 except direct connection of Cable Modem supporting
Dynamic IP with S-160.