SAM4s ER-650
Z Mode
•
91
3. When a report is selected, the
Z REPORT OPTIONS
screen displays:
Z REPORT OPTIONS
RPT#: 1 FINANCIAL
1. TYPE 0
Å
0:DAILY 1:PERIOD
2. 0:PRINT 0
3. IRC 0
0:STANDALONE
1:ALL 2:SELECT
4. Select the TYPE (DAILY or PERIOD and the IRC configuration. Refer to the
explanations in the table below. Press
ENTER
after each selection. After the
last selection, the report will start.
5. If IRC is SELECT, then the register selection displays:
Z REPORT OPTIONS
RPT#: 1 FINANCIAL
1. TYPE : 0
0:DAILY 1:PERIOD
2. 0:PRINT 0
3. IRC 2
# 1 2 3 4 5 6 7 8
Y
Å
Y N N N N N N
6. Press
the
YES/NO
key at each register # to select whether you wish to include
each register in the consolidated report. Press
ENTER
after each selection.
After the last selection, the report will start.
Field Description
TYPE
Select Z1 or Z2 if available for the selected report.
IRC
Select STANDALONE, ALL, or SELECT if available for
the selected report. If SELECT, the screen prompts for
selection of registers - the screen will initially show the
registers available from the from/to IRC register
programming, for example if the IRC range is from 1 to 3,
then the selection will default to:
1 2 3 4 5 6 7 8
Y Y Y N N N N N
