222
•
Program Mode Programming
SAM4s ER-650
4. Continue to enter keystrokes until the macro is complete. Press
ESC
to end the
macro recording and return to the
MACRO PROGRAM
screen. If you wish to
add a function to a macro that is not located on the keyboard, or if you wish to
include the
CLEAR/ESC
,
Y/N
,
PAGE UP
, or
PAGE DOWN
function to a
macro string (these keys are used for editing purposes inside this program), press
PAGE DOWN
to display a keycode list:
FUNCTION KEYCODE
--------------------
NLU#1 - NLU#80(1-80)
ONE 81
TWO 82
THREE 83
FOUR 84
FIVE 85
5. With the keycode list displayed, press
PAGE DOWN
and
PAGE UP
to find the
function you wish to add to the macro. Type the numeric code number press
ENTER
. The function is added to the macro.
Editing an Existing Macro
1. After selecting a macro to program the screen displays the keystrokes currently
programmed.
1. ONE
Å
2. TWO
3. THREE
4. FOUR
5.
6.
7.
8.
2. Press
the
YES/NO
key to advance the cursor to the line you wish to edit.
3. With the cursor pointing at a line, press (or select) the new function you wish to
place in the macro sequence.
4. If you wish to remove a key stroke from a macro, replace the current function
with the
INACTIVE
function by pressing the
PAGE DOWN
to display a
keycode list, then enter
1 8 7
.
