BA_Migros_ED3EX_GB 09.02.2011 12:13 Uhr Seite 34
Probedruck
C
M
Y
CM
MY
CY CMY
K
Wheel Circumference (WHEEL)
By entering the wheel circumference, the exact speed and
number of km travelled can be displayed. If, for example, you
change the outer tyre of your bicycle, you should check the
details and alter these if necessary.
The editing mode of the wheel circumference can be entered
from the SETUP•HEEL display, by pressing the “ENTER” button.
The numbers flash and the wheel circumference can be altered
using the “
' and “
' buttons.
LIGHT (brightness of the background lighting)
You can adjust the brightness of the background lighting to
suit your personal preferences. Please follow the instructions
for this. The editing mode for brightness of the background
lighting can be entered from the SETUP•IGHT display, by pressing
the “ENTER” button.
The current level of display brightness flashes. The value can
be altered to between 10 and 100 % using the arrow buttons.
Please note that 100 % appears rather dazzling at night.
The input process can be accelerated by holding down the arrow
buttons (Repeat function). If an alteration has taken place,
then SAVE / CANC appears in the display (procedure as described
in the preceding examples).
Warning: Only 26” and 28” wheel sizes can be altered in this
framework.
The editing mode is cancelled by pressing the “EXIT” button.
If an alteration has taken place, then SAVE / CANC appears
again (procedure as described in the preceding examples).
130
Operating instructions
ED-3 EX
