BA_Migros_ED3EX_GB 09.02.2011 12:13 Uhr Seite 17
Probedruck
C
M
Y
CM
MY
CY CMY
K
Charging and care of the battery
The ED-3 EX Pedelec operates with a 37V 8.8Ah lithium-ion
battery. PanTerra™ uses top-quality cells which are combined
into a 37V cell pack. In addition, the battery also contains an
electronic protection system which prevents deep discharging
and overcharging.
Avoid storing a completely empty battery over several weeks.
Always use the high-quality lithium-ion charger supplied (Graphic
6) or the corresponding original PanTerra™ replacement part
for charging your battery. The original charger operates using
CC-CV
4
technology. In conjunction with the battery’s electronic
protection system, the possibility of any damage occurring to
the battery at any time can therefore be ruled out as can any
possibility of overcharging through an incorrect charging current.
The charger is for indoor use only!
Please read the charger
manual attached prior to initial use.
Remove the charger (Graphic 6) from the box, loosen the bundle
of cables and connect it to the multi-pole charging socket
located on the side of the battery. A rubber cover protects it
from spray.
The battery can also be charged on the bicycle.
Figure 5
Connect the charger
to the mains socket
using the mains cable
supplied. The LED of
the charger changes
from green to red.
Charging begins.
4 CC-CV = Constant Current – Constant Voltage: Controlled current strength is first used
to charge quickly and the battery voltage increases. On approaching the maximum
capacity, the current strength is reduced and the remaining capacity is filled only with
exact maximum specified voltage.
Figure 6
GB
113
Pedelec with Lithium-ion battery
