BA_Migros_ED3EX_GB 09.02.2011 12:13 Uhr Seite 15
Probedruck
C
M
Y
CM
MY
CY CMY
K
Check the charging status of the battery. To do this, press the
knob at the LED display on the top side of the battery. Refer to
Figure 2
Figure 2
If all the 5 LEDs do not light up, PanTerra™ recommends that
you first charge the battery fully.
To do this, connect the drive battery to the charging device
included in the scope of delivery. Refer to the Chapter
“Charging
the drive battery”
on Page 113.
The compartment for the battery-fuse is located on the side.
(cover with symbol
).
Slide the battery into the support slot on the Pedelec as
demonstrated in Graphic 4 and 5. Ensure that the contact pins,
which are fixed into the support slot, slide smoothly into the
connectors of the battery.
GB
Lithium-ion batteries get self-discharged much
slower than Nickel batteries and can therefore be
stored for approximately 6 months without
recharging. However, if the battery is not recharged
after this period, the chemical structure can be
damaged, which affects the performance of the
battery considerably and can make it unusable.
111
Pedelec with Lithium-ion battery
