Getting Started
Doc.#6000-0015 Rev: A
Page 3
3. Hard Drive Free Memory: 15 MB
4. Operating System: Windows 95, 98, 2000, ME, NT4
5. Operating Screen Resolution: 1024 x 780
6. A free serial COMM port
Software Installation
!
NOTE
If using the BT110 PC serial port radio proceed to the next section
LT110 Software Installation
When using LT110 (PCMCIA Bluetooth card):
1. Install the LT110 using the vendor supplied CD (ex:Toshiba).
2. Test that the LT110 card is operational using the vendor supplied
software. If you do an Inquiry and the CrossNet node is powered ,
it should display the Node’s Bluetooth address.
3. Configure a serial port. Access the Bluetooth Configuration icon in
the Windows control panel (Figure 1A, top) . You'll see virtual
serial ports assigned to the Toshiba card (Figure 1A,bottom). Add
a virtual serial port (ex Com 3) and select 'Serial Port Profile' on
the right side. Then close all windows and reboot. Use this Com
Port number in the CrossNet installation (Figure 6).
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]
