16
h
T
.
CANCEL
key for 2 seconds. It’s not recommended to switch off
urn the autoclave off after use To do that, press the
the circuit breaker in the back of the autoclave or disconnect the equipment from the outlet so that it is not
necessary to adjust the time and date again.
CRISTÓFOLI
A U T O C L
A V E S
I N S T R U C T I O N M A N U A L
ATTENTION!
Even after the beeps that indicate the conclusion of the cycle, the contents of the chamber will still be hot.
Never
touch the internal parts of the autoclave directly chamber, trays, materials, etc.
ait for them to be
(
) when hot, w
cool enough before handling. R
gloves for thermal protection
emember to use safety
.
Note:
As a component of the equipment, the USB flash drive is provided along with the autoclave.
Fig. 13
ATTENTION!
When opening the autoclave for cooling, observe
the correct position of the door in the picture. The autoclave
Vitale Plus
dries with the door closed
, its opening is only
necessary to speed up the cooling process of the
instruments/articles sterilized.
Upper view
Note:
Heating time values are expressed considering the technical data chart (Table 5, page 19) regarding the autoclave
proper
working temperature range.
The table below provides information about the equipment heating time; sterilization temperature and pressure;
Sterilization time; drying time and maximum drying temperature.
Table 4
Sterilization
Temperature and Pressure
Sterilization
Time
Mode
2
1- Wrapped Instruments
30 to 50 min.
134 ºC / 210 kPa (
2.1 kgf/cm
)
10 min.
45 min.
2
2- Plastic and Cotton
30 to 50 min.
121 ºC / 118 kPa (
1.2 kgf/cm
)
30 min.
45 min.
2
3- Surgical Kit and Fabrics
30 to 50 min.
121 ºC / 118 kPa (
1.2 kgf/cm
)
30 min.
50 min.
2
4- Liquids
30 to 50 min.
121 ºC / 118 kPa (
1.2 kgf/cm
)
30 min.
- - - - -
Maximum Drying Temperature: 121 or 134 ºC (depending on the cycle chosen).
Drying
Time
Heating
Time
QUALITY CONTROL
Cristófoli equipment are tested and monitored individually, according to the parameters of the Table 4 (above). Besides
the physical parameters, all autoclaves are tested with chemical indicators (class 5). The tests with biological indicators are
performed on a batch basis.
Summary of Contents for Autoclave Quadra 54
Page 2: ......
