Cristofoli Autoclave Quadra 54, Manual

Page: 7 / 26

6
CRISTÓFOLI
A U T O C L A V E S
I N S T R U C T I O N M A N U A L
Whenever the autoclave is unplugged and reconnected, the system will prompt you to set the date and time by
showing the message
DATE/TIME?
on the display.
SET
Setting procedure:
1.
To set, press START . Note: To skip this step, press CANCEL , the data will not be set and the standard values will be
applied (January 1st, 2009, 12 am).
2. The display will show next
INSERT DATE
and the standard date (
JAN/01/2009
). The piece of information to be set will be
flashing.
3. Press MODE or CANCEL to set the data.
4. Press START quickly to alternate the target information (day, month and year) and keep it pressed until you hear the
confirmation beep of the data you have entered.
5. Next, the display will show
INSERT TIME
and the standard time (
12:00 am
). Again, the piece of information to be set will
be flashing.
6. Press MODE or CANCEL to set the data. Note: The am/pm mode cannot be set directly.
7. Press START quickly to alternate between hours and minutes and keep it pressed until you hear the confirmation beep
of the data you have entered.
DATE AND TIME SETTING