OPTIONAL TURBO TIMER MODE
OPTIONAL TURBO TIMER MODE:
IMPORTANT NOTE: This mode requires the use of an extra part called a momentary switch or button
that is not included with the kit. Check with your installer about adding this feature. The optional
Turbo Timer mode allows the your system to keep your vehicle running for 1 to 5 minutes [selectively]
after you remove the key, exit the vehicle, and lock the doors remotely [if you own a Turbo or Turbo
Diesel]. This is handy for turbo cool down without the need for expensive Turbo Timers.
1) Engine should be running with the key. Press and hold the brake pedal.
2) Press your “Turbo Timer” button 1 to 5 times for each minute of run time you desire. (1 press = 1 min.)
3) Release the brake pedal and your system will confirm by flashing the lights the same number of times the
button was pressed.
4) Turn Ignition switch OFF, remove key and exit the vehicle. Remote lock your doors for safety. The engine
should remain running for the selected number of minutes.
CAUTION!! IF YOU PRESS THE TURBO TIMER BUTTON WHEN ENGINE IS NOT RUNNING IT WILL
TRIGGER A REMOTE START! MAKE A NOTE OF THIS IF YOU HAVE CHILDREN. CONSIDER THIS
WHEN CHOOSING A LOCATION FOR YOUR TURBO TIMER BUTTON.
REMOVE KEY
PRESS TURBO
FLASH 1-5X
EXIT VEH.
PRESS
AND HOLD
BRAKE
TIMER BUTTON
1-5 TIMES
RUNNING
RELEASE
BRAKE
LIGHTS
RUNNING
REMAIN
1-5 MIN.
14
