TRANSMITTER PROGRAMMING
Note: Remotes Transmitters come pre-programmed from the Factory. When re-learning remotes or
adding remotes, ALL your system’s remote codes must be learned at time of programming!! This
system allows storage of up to 4 different remote codes in memory.
1. Open hood (ground the Blue hood pin wire if no hood pin is installed.)
2. Turn key to the ON position. (Starting the vehicle is not necessary.)
3. Press Program/Valet button 4 times. After a few seconds, the unit will flash the parking lights 4 times.
4. Press Button #1 (Lock) & #2 (Unlock) button [at the same time] of the transmitter to be learned. You should
get 2 light flashes indicating the code-learn. Press the Lock and Unlock Buttons on a second, third or
fourth remote. If all 4 codes are learned, the unit will automatically exit code learning mode, otherwise turn
key OFF and close the hood.
NOTES: When learning pager remotes, wait for a beep confirmation tone from the remote before learning
another remote. When learning 1-way “Sidekick” remotes, you do not have to wait. The system will not flash
the lights after learning the 4th remote code.
IGN
OFF
WAIT FOR
4 FLASHES
PRESS 4X's
FLASH 2, 3, or 4 X's
(BLUE WIRE GROUNDED)
IGN
OFF
PRESS TOGETHER
LOCK &
UNLOCK
16
