Crevalle Boats 33 CSF, Owner'S Manual

Page: 106 / 188

106
Exterior Equipment
Center Tackle Prep Station
A tackle prep station equipped with tackle storage,
drawers and a slide out cooler is located in the
helm seat base, aft of the helm seats. There is a
compartment with removable tackle storage trays
in the center of the prep station. Two drawers on
each side of the tackle trays provide storage for
hooks, leaders, knives and tools. One drawer is
equipped with a leader reel holder and ceramic
knife cutter.
The tackle trays and drawers are accessed by
opening a door that becomes a work station when
open. When closed, a bolster on the outside
of the door provides a backrest for the cooler
bench seat. The door is hinged at the bottom
and secured by two twist lock latches. Always
make sure the door is closed and latched before
operating the boat.
Slide Out Cooler/Bench Seat
A slide out cooler is located in a compartment in
the rear of the helm seat/tackle station base, be-
low the tackle station. The sliding base assembly
is equipped with a spring loaded slide bolt latch
that secures the cooler and base in the compart-
ment. There is a removable cushion on the cooler
lid that converts the cooler to a rear facing bench
seat when it is slid out.
To slide the cooler out of the compartment, re-
lease the latch and slide the cooler out. To store
the cooler, push the cooler into the compartment
and secure the base with the latch.
The cooler can be removed by pulling it out of
the compartment and lifting it out of the base.
Make sure the cooler is slid completely into the
compartment and latched before operating the
boat at high speed.
Notice:
Access to the fuel tank sending unit is located
below a removable hatch that is accessible
when the cooler slide assembly is pulled out
and the cooler is removed.
Bait Prep Station & Slide Out Cooler
Slide Out Cooler & Bench Seat
Center Bait Prep Station